How to install a starter on a dodge caravan

Step 1 Open the hood and disconnect the negative black battery wire from the negative battery terminal. Step 2 Disconnect the wiring harnesses on the starter. Step 3 Unscrew the four bolts on the starter using a socket wrench and a 10mm socket. Dodge caravan 3. And to replace your malfunctioning starter, there is no need to search long, just opt for this premium. Osgr starter design product fit :.

If your engine starts hard or fails to start, the problem can be in the starter. Want your prized possession to look and perform the way it was designed to? If you try it 3 or 4 times it usually does start then.

Next connect black cable to the negative terminal of donor battery, then to the bare metal in the engine bay of your grand caravan.

You can change the starter yourself, saving the time and money of having a mechanic change the starter for you. Prices may vary depending on your location. Over time, your Dodge Grand Caravan ignition switch may wear out due to dirt and debris getting lodged in the switch.

This can cause the cylinders to wear down and not function properly. The Dodge Grand Caravan has also has a problem with the wafer material inside the ignition switch getting bent and causing the switch to be locked and unable to move. You can easily replace the switch to repair the problem and have your vehicle operating properly.

Detach the negative battery cable from the battery of your Dodge Grand Caravan with an open-end wrench and move the cable out of the way.

Be careful that the cable does come into contact with any metal parts to avoid creating a spark. Unfasten the lower dashboard of the vehicle with a screwdriver and take the dashboard out of the way. Lift the vehicle up with the floor jack, and remove the jack stand from underneath the vehicle. Lower the Dodge Grand Caravan down so it sits on the ground. Attach the negative battery cable to the battery with an open end wrench. Remove the wood block from behind the tire.

Carl Pruit has been a freelance writer since , specializing in service journalism and travel. His work has appeared on various websites. Step 1 Unfasten the negative battery cable from the battery with an open end wrench, and move the cable away from any metal parts.